PCBA Burn-in / ageing equipment

Subscribe to Thread

PCBA Burn-in testing: We need to test some products from -4... - Dec 01, 2008 by snaggletooth

What kinds of equipment are you looking for? Alot of people... - Dec 01, 2008 by WaveMasterLarry

DC powered Power-up and ageing burn-in equipment, preferably... - Dec 01, 2008 by snaggletooth

Try looking at Chart Industries. They offer HASS/HALT chambe... - Dec 03, 2008 by mrmaint

We use Sharetree equipment for this task. Good for up to aro... - Dec 04, 2008 by Pete B

We have a couple of Qualmark HALT/HASS chambers here. Never ... - Dec 04, 2008 by jdumont

snaggletooth

#57451

PCBA Burn-in / ageing equipment | 1 December, 2008

PCBA Burn-in testing: We need to test some products from -40c - +71c and need some testing equipment for it. We have some burn-in equipments but not at the this temperature range and not at the 7c per minute change rate that is needed. Anyone have some suggetsions on what equipment would be suitable?

reply »

WaveMasterLarry

#57452

PCBA Burn-in / ageing equipment | 1 December, 2008

What kinds of equipment are you looking for? Alot of people arent explicit these days, guess it's the holidays. Had some rabel-rouser borrow my volt ohm meter and the next thing I know it's on the line being used as test equipment. Tried to give a Fisher-Price replacement unit. I like to check solder joints with it, guess I can kiss that baby good by.

reply »

snaggletooth

#57461

PCBA Burn-in / ageing equipment | 1 December, 2008

DC powered Power-up and ageing burn-in equipment, preferably non-product specific, starting from room temperature down to -41 degrees celcius and up to +71 celcius at a rate of 7 celcius per minute. But anyone who could suggest a manufacturer would be great......all of our burn-in ovens are custom made and customer supplied.....non-functional testing but temperature stress testing......i dont know what to call it in english....

reply »

mrmaint

#57482

PCBA Burn-in / ageing equipment | 3 December, 2008

Try looking at Chart Industries. They offer HASS/HALT chambers that are capable of reaching the paramaters that you are looking for. Will require a nitrogen supply for the cooling end.We had a 3000gal tank of liquid nitrogen to feed two chambers.

reply »

Pete B

#57500

PCBA Burn-in / ageing equipment | 4 December, 2008

We use Sharetree equipment for this task. Good for up to around 30 deg. c per minute ramps if required with liquid Nitrogen cooling.

reply »

jdumont

#57501

PCBA Burn-in / ageing equipment | 4 December, 2008

We have a couple of Qualmark HALT/HASS chambers here. Never had a problem with either.

reply »