Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Meridian 1030 failures

Views: 2434


MM

#59750

Meridian 1030 failures | 1 September, 2009

Is there anyone out there that can help me with a Y1 axis failure on a Meridian 1030? It seems to be an intermittant problem but is now getting worse. Please let me know if you can help

reply »

#59758

Meridian 1030 failures | 2 September, 2009

First thing to do is make sure the y-axis encoder scale is clean. Usually on these machines you can view the status of the read head or there is a led on the cable from the read head that will let you know if it is working correctly. Green means its reading good and red is a bad spot. I dont know the 1030 real well but you should be able to move the gantry by hand and view the read head/cable led as you move it.

Good Luck,

reply »

SMT spare parts - Qinyi Electronics

SMT fluid dispensing