Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

JUKI KE2060R and KE2060L

Views: 4078


JUKI KE2060R and KE2060L | 18 September, 2009

Can anyone tell me the difference between these two machines ?

reply »


JUKI KE2060R and KE2060L | 21 September, 2009

R series Features

FCS (Flex Calibration System) highly regarded easy maintenance just got even easier! The optional FCS calibration jig is a simple to use system to re-calibrate placement accuracy. The machine automatically picks and places jig components, then measures the error and adjusts all necessary calibrations. (optional) Fast and easy setup, Low defect ratio

Auto Teaching of Pick Position Auto teaching of pick position reduces changeover time and mis-picks.

HMS (Height Measurement System) Now standard on all R Series models, the HMS is used to quickly and accurately measure the component pick height. A laser sensor measures the distance instantly without any physical contact. Flexible

Camera Bad Mark Detection Bad mark detection is performed using the machine’s standard downward looking camera (also used for fiducials and teaching). This system accurately detects a wide range of marks on various substrates, including flex circuits. Simple operations

Graphical user interface Easy to use and easy to learn programming and operations make the R Series a great choice for new or experienced operators. Add the optional touch panel or rear side operation panel for even greater convenience. Maximum throughput

Simultaneous Pick Priority Mode Users can now select the best pick mode to suit their production requirements. For the maximum possible throughput, simultaneous pick priority mode will try to pick as many components as possible in a single pick sequence. High density placements

Pick Position Priority Mode For high density component placement, pick position priority always picks components at the taught pick location.

For more information, please check the attachment in this post.


reply »


JUKI KE2060R and KE2060L | 21 September, 2009

Thank you.

reply »

IPC Certification Training Schedule IPC Questions and answers

Surface Insulation Resistance