Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Mydata Centering motor problem

Views: 2173

#59905

Mydata Centering motor problem | 21 September, 2009

We have a TP9 with a centering motor issue. (TPSYS Ver 2.5.3)

The error message F-MOT-SETDYN C/3 Upper endpoint outside limits is shown during C-motor initiation. I've looked in the service program and also the parameters in TPSYS but can find no mention of adjusting the upper limit parameter.

The motor seems to move fine during initiation, but that's as far as I can get.

Thanks Darren

reply »

#59907

Mydata Centering motor problem | 21 September, 2009

Found the problem.

A small part had previously fallen off the nozzle, and ended up behind the left centering jaw preventing the jaw from opening up fully.

Cheers Darren

reply »

IPC Training & Certification - Blackfox

Electronics Equipment Consignment