Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
AOI - Whether Vi Tech or Omron

AOI - Whether Vi Tech or Omron

Subscribe to Thread

Dear ALL, Which machine is the best cost effective in the... - Oct 07, 2009 by Nagesh

Do a search for both of these vendors on this forum and you ... - Oct 07, 2009 by Reese

Nagesh, I haven't worked with an Omron machine, so I c... - Oct 12, 2009 by Pitbull

Mirtec and Yestec are the only games in town. ... - Oct 14, 2009 by Jason Duerr

We've been using Vi machines for 6 years now and love them. ... - Oct 15, 2009 by R.Powers

Hello Nagesh, Do yourself a favor, check out MIRTEC's MV-... - Oct 23, 2009 by Tony_D

I used Mirtec's 5 years ago. At this place we have Vi-techs... - Oct 23, 2009 by Stephen

Hi... Do you have consider other brand excluding these Omron... - Nov 05, 2009 by Shinsei Technology

We recently purchased MVP - we found it performed best and w... - Dec 02, 2009 by daveyb

both are strong in their unique speciality. it depends on w... - Dec 02, 2009 by ecyor

Nagesh

#60058

AOI - Whether Vi Tech or Omron | 7 October, 2009

Dear ALL,

Which machine is the best cost effective in the Pre-Reflow stage.(Programming lead time/Inspection capabilities) Whether it is AOI from Omron or ViTech. Thx in advance for all your sincere postings.

Cheers, Nagesh

reply »

Reese

#60064

AOI - Whether Vi Tech or Omron | 7 October, 2009

Do a search for both of these vendors on this forum and you may find what you need.

reply »

Pitbull

#60093

AOI - Whether Vi Tech or Omron | 12 October, 2009

Nagesh,

I haven't worked with an Omron machine, so I can't comment on that. We use VI and are extremely satisfied with their performance.

reply »

Jason Duerr

#60113

AOI - Whether Vi Tech or Omron | 14 October, 2009

Mirtec and Yestec are the only games in town.

reply »

R.Powers

#60121

AOI - Whether Vi Tech or Omron | 15 October, 2009

We've been using Vi machines for 6 years now and love them. For us they have been quick to program, good at optimizing, and excellent at low false fail rates. The vision tools also gave us more accurate component data. We had problems with high false fails rates with Omron, although that was a couple years ago. Omron themselves said they couldn't do any better. I don't know if their current product is any better.

Rob

reply »

Tony_D

#60160

AOI - Whether Vi Tech or Omron | 23 October, 2009

Hello Nagesh,

Do yourself a favor, check out MIRTEC's MV-7 system. I purchased one of these machines with the Intelli-Scan laser option. This is a secondary laser inspection system that allows you to test for coplanarity of leaded and non-leaded devices using laser height measurement. In my opinion this is the best investment that I have ever made.

Good Luck...

Tony_D

reply »

Stephen

#60169

AOI - Whether Vi Tech or Omron | 23 October, 2009

I used Mirtec's 5 years ago. At this place we have Vi-techs. I can see why the people who recommend Vi-techs do so. They are good machines.

However overall I would recommend the Mirtechs. They were faster and easier to program. And they were were a lot better at identifying wrong parts, not just part absence/presence.

And it sounds like they are better than when I used them, which is not suprising. They didn't wait for me to give feedback, they actively sought it and acted on it.

reply »

Shinsei Technology

#60321

AOI - Whether Vi Tech or Omron | 5 November, 2009

Hi... Do you have consider other brand excluding these Omron and Vi Tech?? We have try the Omron before but not so effectiveness.

reply »

daveyb

#60594

AOI - Whether Vi Tech or Omron | 2 December, 2009

We recently purchased MVP - we found it performed best and was a fraction of the price of some of the others.

reply »

ecyor