Fine Pitch Wave Soldering

Subscribe to Thread

Hi We did some evaluation to solder 0.4mm pitch by Wave. ... - Mar 08, 2011 by Jacki

Do NOT use ICs with lead pitch ... - Mar 09, 2011 by davef

We have sucessfully built pallets for several customers with... - Mar 11, 2011 by

Sorry for the typo thats MB-Mfg.com ... - Mar 11, 2011 by Mark

It is pretty hard to wave solder fine pitch parts bad enough... - Mar 12, 2011 by josh

Jacki

#63921

Fine Pitch Wave Soldering | 8 March, 2011

Hi We did some evaluation to solder 0.4mm pitch by Wave. We found that there were many solder shorts at Sockets pins so it made touch up time longer. Please advise me someone has achieved the fine pitch soldering by wave. Thanks in advance.

reply »

davef

#63923

Fine Pitch Wave Soldering | 9 March, 2011

Do NOT use ICs with lead pitch <50 thou pitch. If so, bridging is almost guaranteed in the wave.

reply »

palletman

#63936

Fine Pitch Wave Soldering | 11 March, 2011

We have sucessfully built pallets for several customers with fine pitch connectors. By adding a unique insert of titanium webing we eliminated solder bridging and still obtained proper hole fill. Some examples are shown at http://www.mf-mfg.com.

This message was posted via the Electronics Forum @