Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

ip3 mtu

Views: 3522

SZ SENSOR WENT OFF DURING SY AXIS MOVEMENT. WHAT WOULD BE TH... - Nov 14, 2011 by jesse  

You will need to be more specific than that. What do you mea... - Nov 15, 2011 by Sr. Tech  

Well try to run in idle n as soon as the mtu. Goes to pick u... - Nov 15, 2011 by jesse  

Seems odd that the machine would zero set if there was a sen... - Nov 15, 2011 by Sr. Tech  

Do you have any trays in the location you are trying to pick... - Nov 15, 2011 by jdengler  

Thats the odd part that i can zero set no problem just when ... - Nov 15, 2011 by jesse  


jesse

#65442

ip3 mtu | 14 November, 2011

SZ SENSOR WENT OFF DURING SY AXIS MOVEMENT. WHAT WOULD BE THE RIGHT WAY TO FIX PROPER IS OFF.DONT HAVE ORIGINAL PROPER .

reply »


Sr. Tech

#65444

ip3 mtu | 15 November, 2011

You will need to be more specific than that. What do you mean it went off ?

reply »


jesse

#65445

ip3 mtu | 15 November, 2011

Well try to run in idle n as soon as the mtu. Goes to pick up part on tray it goes down but when homing back in position doesnt flag sensor because position is off.so the sz sensor not bieng flaged. Any ideas

reply »


Sr. Tech

#65446

ip3 mtu | 15 November, 2011

Seems odd that the machine would zero set if there was a sensor not being made.

reply »


jdengler

#65449

ip3 mtu | 15 November, 2011

Do you have any trays in the location you are trying to pick from? The Z axis should move until it detects the top of a tray. Without any trays it may not function correctly. Also some machines will need an empty tray below the tray you want to pick from.

Jerry

reply »


jesse

#65451

ip3 mtu | 15 November, 2011

Thats the odd part that i can zero set no problem just when i try to run idle the sz sensor ok when goes down but when it goes back up its not bieng retracted up so sensor stays off n eror acurs again any ideas.

reply »

One stop service for all SMT and PCB needs
convection smt reflow ovens
Now Online
33
Visitors
2
Members

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Fluid Dispensing Aerospace
pressure curing ovens
Solder Paste Dispensing

Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes