DEK PRINTER 265

Subscribe to Thread

i have facing a problem in dek 265 horizon that rising table... - Dec 13, 2012 by yogendra

Please suggest any solution for remove this error in m/c ... - Dec 18, 2012 by yogendra

check for power going to the motor - trip switch at back of ... - Dec 19, 2012 by aj

1. Check for pins or something else under the rails. 2. Che... - Dec 19, 2012 by Evtimov

yogendra

#67832

DEK PRINTER 265 | 13 December, 2012

i have facing a problem in dek 265 horizon that rising table position error ,please help in for solving this problem

reply »

yogendra

#67846

DEK PRINTER 265 | 18 December, 2012

Please suggest any solution for remove this error in m/c

reply »

#67859

DEK PRINTER 265 | 19 December, 2012

check for power going to the motor - trip switch at back of machine...

Swap controller cards to see if the problem moves.

reply »

Evtimov

#67861

DEK PRINTER 265 | 19 December, 2012

1. Check for pins or something else under the rails. 2. Check the motor for the axis and the sensor that defines up position(I doubt it there is an encoder for this motor) 3. check card 4. check interface cable

reply »

SMTnet
»
Electronics Forum
»
DEK PRINTER 265

Complete Conformal Coating Line solutions for end-to-end process automation and closed-loop quality control with global support. Nordson Asymtek

High Precision Fluid Dispensers

ONLINE IPC Training & Certification