Mirtec Aoi Programming (double sided pcb) MV-2HTL 1.3 megapixel camera software rev 4

Subscribe to Thread

Hello there everyone! Our company just bought an AOI Insp... - Mar 29, 2014 by josse

Hello, I have newer generation machine(MV-7) and in my so... - Apr 01, 2014 by Evtimov

Same option is in the MV-2 Open both programs and then run... - Apr 04, 2014 by Armando_Gomez

josse

#71890

Mirtec Aoi Programming (double sided pcb) MV-2HTL 1.3 megapixel camera software rev 4 | 29 March, 2014

Hello there everyone!

Our company just bought an AOI Inspection Machine, and that is the Mirtec MV-2HTL 1.3 megapixel, software rev 4. I am trying to create a program that runs the top side first and then asks to run the bottom side consecutively. I have no problem running or creating a program for the top side.

reply »

Evtimov

#71899

Mirtec Aoi Programming (double sided pcb) MV-2HTL 1.3 megapixel camera software rev 4 | 1 April, 2014

Hello,

I have newer generation machine(MV-7) and in my software I can open two programs at the same time. After you do that there is a button in the software saying T/B. when you press this button it will run board1(or top side) and right after you take out the board will change the program to board2(bottom side) and will run that. Then top-bottom-top....

reply »

Armando_Gomez

#71916

Mirtec Aoi Programming (double sided pcb) MV-2HTL 1.3 megapixel camera software rev 4 | 4 April, 2014

Same option is in the MV-2 Open both programs and then run one of them after inspection turn the board and press start it would change to the other program with no problem.

reply »