Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Coilcraft Inductors Open

Views: 3349

#72568

Coilcraft Inductors Open | 13 August, 2014

After wash cycle, some of the inductors are open (broken wire). Resistance across the two ends should be below 4 ohms (normal) however on broken wire shows above 200 ohms. I am wondering if anyone else has seen this problem. We are using High-Reliability Power Inductors ML416PJB

reply »

#72578

Coilcraft Inductors Open | 15 August, 2014

Hi Dave,

We can help. Please ask this consultant to contact us directly. There are a number of possible reasons and we'll have many questions to get to the root cause. We are always happy to help solve customer problems.

Thanks and Best Regards, Chris ----------------------------------------------------- Christopher Hare Coilcraft Engineering E-mail: cust_serviceatcoilcraft.com Phone: 847-516-7286

reply »

SMT spare parts - Qinyi Electronics

Encapsulation Dispensing, Dam and Fill, Glob Top, CSOB