Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
Reflow oven

Reflow oven

Subscribe to Thread

Hello Professionals, Good morning, We are circuit card manu... - Jun 26, 2015 by AsifJaleel

BTU is the "Cadillac" of the ovens. I worked with all of the... - Jun 26, 2015 by Evtimov

Rehm Thermal VX Series is the VW, Audi and BMW of reflow....... - Jun 29, 2015 by josh

Hello Evtimov, Thank you for your reply. I have received th... - Jul 01, 2015 by AsifJaleel

Hello Josh, I do not have any information about Rehm oven. ... - Jul 01, 2015 by AsifJaleel

You have to keep the oil containers for the chains loaded wi... - Jul 01, 2015 by Evtimov

Hello Evtimov, Appreciate your reply. It is good to know so... - Jul 01, 2015 by AsifJaleel

Hello. I used Heller before - very stable oven, I had zero p... - Jul 14, 2015 by Buckcho

AsifJaleel

#74132

Reflow oven | 26 June, 2015

Hello Professionals, Good morning, We are circuit card manufacturer for the Aerospace industry with low volume and High mix level. We have a plan to Purchase a NEW REFLOW OVEN. Currently we are using Electrovert BRAVO reflow oven which is about 8 years or more . we want to get better reflow oven to meet our requirements and it should be maintenance free. We have got ( Vitronics-soltec, Heller industries, BTU, Speedline Omnimax7 ). What would be the best choice that you recommend us.?

Thank you, Asif

reply »

Evtimov

#74133

Reflow oven | 26 June, 2015

BTU is the "Cadillac" of the ovens. I worked with all of the brands you mentioned. If you can afford it, don't even think about it.

reply »

josh

#74138

Reflow oven | 29 June, 2015

Rehm Thermal VX Series is the VW, Audi and BMW of reflow....Has features that enable best in industry process, lowest power and best N2 consumption should you run N2.

Price is not cheapest on market but ROI has to be looked at in all areas not just up front costes.

reply »

AsifJaleel

#74154

Reflow oven | 1 July, 2015

Hello Evtimov, Thank you for your reply. I have received the quote for the BTU Pyramax. How about the preventive maintenance compared with other ovens in the market..?

reply »

AsifJaleel

#74155

Reflow oven | 1 July, 2015

Hello Josh, I do not have any information about Rehm oven. Can you able to provide materials to see the oven features ?

thanks

reply »

Evtimov

#74158

Reflow oven | 1 July, 2015

You have to keep the oil containers for the chains loaded with oil. The procedure is automatic and you will run it based on your usage. Other than that our 10zone Pyramax is running for 5years without any failure.

reply »

AsifJaleel

#74161

Reflow oven | 1 July, 2015

Hello Evtimov, Appreciate your reply. It is good to know some of its features. Thank you .!

reply »

Buckcho

#74215

Reflow oven | 14 July, 2015

Hello. I used Heller before - very stable oven, I had zero problems. Maintenance is also very easy. I also think they are not so expensive. You have to look at the power consumption and N2 if you are going to use it. Some ovens can trick you with low prizes but huge consumption. I have been using SMT for a several months now, I also was present during installation, but I am not sure it deserves the good feedback it gets for its huge prize... Also we had a few small problems after installation.

reply »