PCB Surface Finishing for good solderability & rework

Subscribe to Thread

Hi brothers, Can anyone give me some clear ideas that which... - Jul 15, 2015 by Syed Shahrat

If you are using lead solder (SnPb) HASL is a good choice. ... - Jul 15, 2015 by dyoungquist

From my experience Electroless Nickel Immersion Gold or ENIG... - Jul 15, 2015 by MikeKeens

ENIG finished is recommend. But the price is a little highe... - Jul 18, 2015 by David

Hi Syed, I'm a PCB engineer from China. First:Immersio... - Jan 13, 2016 by Shenze pcb

Syed Shahrat

#74221

PCB Surface Finishing for good solderability & rework | 15 July, 2015

Hi brothers, Can anyone give me some clear ideas that which surface finishing is the best for PCBs used for LED TV motherboard production?

Some says that OSP is good but it is not good for double sided board. So I am a bit confused in between HASL,OSP and Immersion plating.

reply »

dyoungquist

#74223

PCB Surface Finishing for good solderability & rework | 15 July, 2015

If you are using lead solder (SnPb) HASL is a good choice. If you are using lead-free (RoHS compliant) solder then I would recommend Immersion Gold (ENIG).

reply »

MikeKeens

#74225

PCB Surface Finishing for good solderability & rework | 15 July, 2015

From my experience Electroless Nickel Immersion Gold or ENIG finish gives the best results but does cost more than other available finishes. It has good solderabilty, good shelf life and is flat.

Details of other available PCB surface finishes can be seen here:-

http://www.surfacemountprocess.com/preferred-pcb-surface-finish.html

reply »

David

#74237

PCB Surface Finishing for good solderability & rework | 18 July, 2015

ENIG finished is recommend. But the price is a little higher.

For the PCB, I recommend Elecrow PCB service. You will see the PCB fabricated there is really cheap and the quality is really good.

reply »

Shenze pcb

#75208

PCB Surface Finishing for good solderability & rework | 13 January, 2016