Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Assembleon Opal nozzle repair

Views: 2412

#74346

Assembleon Opal nozzle repair | 7 August, 2015

Can Assembleon Opal nozzles be repaired? I have a few ith chips on the corners of the tips. It appears as though the tips are pinned in the bodies of the nozzles, and that they could be changed out. Thanks

reply »

#74370

Assembleon Opal nozzle repair | 12 August, 2015

I'm not sure if they can repaired. I'm sure you could do something yourself to do a DIY fix, but it would probably be easier to just buy new nozzles from assembleon. Not entirely sure, just my initial thought, would like to hear from others

reply »

#74433

Assembleon Opal nozzle repair | 24 August, 2015

> Can Assembleon Opal nozzles be repaired? I have > a few ith chips on the corners of the tips. It > appears as though the tips are pinned in the > bodies of the nozzles, and that they could be > changed out. Thanks

> Can Assembleon Opal nozzles be repaired? I have > a few ith chips on the corners of the tips. It > appears as though the tips are pinned in the > bodies of the nozzles, and that they could be > changed out. Thanks

We buy them from China, sub $25 from memory so not worth repairing. Message me and I'll send you the details, cheers, Rob.

reply »

Facility Closure

ICT Total SMT line Provider