Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


What's the best company for low volume, quick turn around PCB assembly?

Views: 11133

What's the best company for low volume, quick turn around PC... - Oct 30, 2015 by Bill R  

I would recommend: ... - Nov 09, 2015 by RUSHPCBUK  

#74806

What's the best company for low volume, quick turn around PCB assembly? | 30 October, 2015

What's the best company for low volume, quick turn around PCB assembly?

Why do you choose their service over others? What's the cost ballpark for 10 3"x3" boards assembled?

reply »

#74812

What's the best company for low volume, quick turn around PCB assembly? | 2 November, 2015

this is very touchy.There are many CPMs out there. Which one is the best for you though is what you should figure out. I think your boards density, quantities and variety assemblies will define that. One of our customers has around 1000 different assemblies - most of them easy to build anad in small quantities. We usually build 60-70 assemblies a week for them. In case like that - more machines in the line(more feeder capacity) gives you opportunity to make a bigger setup and run more different assemblies faster. Still you need to make sure what time of the line will be dedicated to your product.

reply »

#74813

What's the best company for low volume, quick turn around PCB assembly? | 2 November, 2015

As for cost, that will depend on several things....

-Turn key or consignment? -Diversity of components? -Total quantity of components to be loaded? -Single or double sided SMT? -Individual boards or are they panelized? -No clean or water soluble flux and do the finished assemblies need to be cleaned? -Any components that can not go through an aqueous wash process? -Are there any through hole components?

No way to give a cost ballpark until more information is known about the assemblies.

reply »

#74814

What's the best company for low volume, quick turn around PCB assembly? | 2 November, 2015

I'd look close to home first. Nothing beats meeting face to face with the EMS guys. You may sacrifice lowest price but gain a better overall experience.

reply »

#74826

What's the best company for low volume, quick turn around PCB assembly? | 4 November, 2015

Hi Bill,I think you should give a brief induction to your boards. As far as I know,there are so many assembly house in China.But I dont think they will offer a good price for 10 pcs.

reply »

#74850

What's the best company for low volume, quick turn around PCB assembly? | 9 November, 2015

I would recommend: http://www.rushpcb.com

This is without any doubt the best source of low cost pcb with great quality and fast delivery.

Steve

reply »

#74862

What's the best company for low volume, quick turn around PCB assembly? | 11 November, 2015

Hi Steve,

I'm doubting you, care to back your claims up as to why you are better than every other company in the entire world?

Rob.

reply »

#74863

What's the best company for low volume, quick turn around PCB assembly? | 11 November, 2015

Are we to infer no bias in this commentary?

reply »

#74895

What's the best company for low volume, quick turn around PCB assembly? | 16 November, 2015

This is not a question easily answered without starting a frenzy of sales pitches. Far too many great choices in our industry. Best to ask for some suggestions of companies users recommend.

reply »

#74898

What's the best company for low volume, quick turn around PCB assembly? | 17 November, 2015

Hi Bill, there are a number of CMS/EMS companies available in the UK which offer quick turn-around PCB assembly listed at the website below:-

http://www.surfacemountprocess.com/contract-electronic-manufacturing.html

reply »

#75007

What's the best company for low volume, quick turn around PCB assembly? | 3 December, 2015

Bill, where are you located geographically?

reply »

#75150

What's the best company for low volume, quick turn around PCB assembly? | 6 January, 2016

Give us a shot, we are a one stop shop. http://www.sbcinc.com/

reply »

#75165

What's the best company for low volume, quick turn around PCB assembly? | 7 January, 2016

Not sure how anyone could pretend to "ballpark" a cost for a board, regardless of size, especially in small quantities.

You might need 10 assemblies, but the MOQ for your main component might be 100, 200, 500, 5K pcs.

Makes me laugh every time I see that type a request. MOQs can lead to quotations like this: You want 1000 boards? $10 each You want 10 boards? $1000 each

'hege

reply »

#75167

What's the best company for low volume, quick turn around PCB assembly? | 8 January, 2016

> What's the best company for low volume, quick > turn around PCB assembly? > > Why do you choose > their service over others? What's the cost > ballpark for 10 3"x3" boards assembled?

> What's the best company for low volume, quick > turn around PCB assembly? > > Why do you choose > their service over others? What's the cost > ballpark for 10 3"x3" boards assembled?

I recommend you http://www.pcbnpi.com They provide one stop service for pcb prototype and assembly service,very low cost and professional.NO MOQ! BTW,FREE laser stencil there.

Delmoresky

reply »

Eric

#75171

What's the best company for low volume, quick turn around PCB assembly? | 8 January, 2016

there is no best company just the company best for you. E.g. I use PCBgogo(www.pcbgogo.com/b), they make PCB and also do PCBA, but they don't buy components for me. I don't like this at first and I prefer turn-key service, but why I still choose them? I think it's because the low cost PCB and assembly fee, the easy quote and order process and the fast lead time. I can just do PCB or PCBA, I like their service. However, if I want turn-key service, I have to ask for other suppliers. Anyway, the good news is they have promised me that they will do turn-key service in 2016. Hope it comes soon. So I think it always have a run-in period with the suppliers best for you. you just need be patient for searching a good supplier and then patiently pass a run-in period.

reply »

#75210

What's the best company for low volume, quick turn around PCB assembly? | 13 January, 2016

Dear Bill,

Can you please send your file to me?I can quote to you within 6 hours.

Skype: crystal-pcb

E-mail:sales07@shenzeelectronic.com

reply »

#75955

What's the best company for low volume, quick turn around PCB assembly? | 7 July, 2016

We are one of the finest PCBA manufacturers in India focusing more on prototype, low-medium volume production with up to date capabilities. Please visit our website http://www.allnyx.com for more details. Please share your requirement for quote.

Ashvin.Navadia@Allnyx.com

reply »

#77661

What's the best company for low volume, quick turn around PCB assembly? | 1 June, 2017

Hi Bill,

My name is Julie Farrell and I work for ICAPE Group.

We have 35 PCB manufacturing partners in China. You can imagine how competitive on pricing this makes us!

certificates, ISO9001 and IPC Membership. We also have the capabilities of the following approved vendor certificates, TS16949, ISO14001, AS9100 and ISO13485.

We have a quick turn service model great for prototyping! You will have your boards in as little as 5 days.

I can assure you we have great prices along with good quality/ lead time.

I would love to show you a competitive quote! Please reach out to me on my information below.

Linkedin> https://www.linkedin.com/in/julie-farrell-19372982/

Julie Farrell Account Manager ICAPE-USA Inventrek Technology Park 700 E. Firmin Street, Suite 228 Kokomo, IN 46902 USA Direct: 1+765-480-1351 Email: Julie.farrell@icapeusa.com www.icape-group.com

reply »

#77662

What's the best company for low volume, quick turn around PCB assembly? | 1 June, 2017

> What's the best company for low volume, quick > turn around PCB assembly? > > Why do you choose > their service over others? What's the cost > ballpark for 10 3"x3" boards assembled?

Most likely the one closest to you physically. But in any case for low volume quick turn, shop locally.

reply »

#77666

What's the best company for low volume, quick turn around PCB assembly? | 2 June, 2017

Julie, Quick turn service is when a customer walks in the door at 7 AM with a kit for 10 pcs and then catches his noon flight with completed assemblies which yielded 100% 5 days is almost standard turn time for a good shop.

reply »

#77668

What's the best company for low volume, quick turn around PCB assembly? | 3 June, 2017

sugget one company, 3cm * 3cm board, now have promotion just $5 sure good quality, as more than 20 years experience. do you want to try?

reply »

See Your 2024 IPC Certification Training Schedule for Eptac

Manufacturing Software