Bubbles formation in conformal coating

Subscribe to Thread

Hi, Currently we are facing bubble formation in conformal... - Sep 20, 2016 by Ren

I know this doesn't answer your question, but thought that t... - Sep 20, 2016 by davef

Ren

#76372

Bubbles formation in conformal coating | 20 September, 2016

Hi,

Currently we are facing bubble formation in conformal coatings in the pcba. Have varied various specs of the conformal coating machine, even during manual application also having the same issue. the material used is silicone conformal coating. Need possible suggestions to overcome this problem.

Thankyou

reply »

davef

#76373

Bubbles formation in conformal coating | 20 September, 2016

I know this doesn't answer your question, but thought that the "operational qualification" section was thorough here [look in the "white papers"]: Conformal Coating 101 [http://www.btw-inc.com/pdf/CONFORMAL_COATING_101.pdf]

In answer to your question: You're creating bubbles in your conformal coating by trapping air or vapor in the coating. For more: GOOGLE => 5 Common Causes of Bubbles in Conformal Coating (and Their Remedies)[Diamond-MT's Blog]

reply »

SMTnet
»
Electronics Forum
»
Bubbles formation in conformal coating

ZESTRON's product line of cleaning agents are designed to reliably remove solder pastes and SMT adhesives from stencils, screens, and misprinted PCBs. Increase the life of your stencils and make your solder printing process more effective and reliable.

High Throughput Reflow Oven

Work area of a dispense system too small for your substrate? Learn how to handle substrate greater than 24?