Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


printing problem on mydata machines

Views: 1714

#76927

printing problem on mydata machines | 24 January, 2017

we have one dot matrix printer and i would like to connect it to the TP9 machine. The parameters settings for printer is "protected" so i cannot assign the printere to the machine. How do i "unprotect" the parameter to allow me to make changes?

reply »

#76940

printing problem on mydata machines | 26 January, 2017

If you're lucky, that parameter can be unlocked using the parameters password.

If you're unlucky, and it can't be changed using the password, that'll mean it's hardware protected. You'll need a new magic word from Mycronic to update it.

Cheers, ..rob

reply »

#76941

printing problem on mydata machines | 26 January, 2017

It also could be that your user level that you are logged in on may not have access to change parameters

reply »

#76950

printing problem on mydata machines | 30 January, 2017

exit TPSys and type setPrinter

reply »

SMT Pick and Place

PCB equipment