Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Electrovert econopak boot disk

Views: 4179

#77589

Electrovert econopak boot disk | 16 May, 2017

Any one happen to have an Electrovert econopak plus 400/f floppy boot disk that will run the machine?

reply »

#80649

Electrovert econopak boot disk | 9 July, 2018

I need the boot disk from Electrovert econopak plus 400/f! Anyone can help me, please?!?

reply »

#80677

Electrovert econopak boot disk | 16 July, 2018

I have install and program disk for Electrovert EPK +400. Contact me at charlie.magill@elecsyscorp.com

reply »

#80802

Electrovert econopak boot disk | 30 July, 2018

If you still need them I have a copy, shoot me a PM.

reply »

#80995

Electrovert econopak boot disk | 3 September, 2018

Maybe your CMOS battery is dead! On some of these old system once the battery is drained the CMOS settings are lost, this would include the correct setting for detecting the hard drive and I doubt there is an auto detect . Try turning on the machine and hitting "Delete" or "S" keys or whatever will get you to the BIOS settings. I can't tell you what hard drive setting would work, but try the different selections for the Hard drive, save it and reboot. If this is your problem and you do find the correct setting then the machine could very well boot up. You can see if there are any HD settings written on the hard drive itself. If this is your problem and you do find a setting that works you will have to replace the battery or find a way to source the 3 volts. I believe if the machine power is left on (computer on) you will be okay, but if you turn it off of course you would lose the settings again.

reply »

Smart Factory Starter Kit - KIC

Selective Conformal Coating System - GPD SimpleCoat