Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Camera not parked error on mpm ap 25.

Views: 1887


Don

#77712

Camera not parked error on mpm ap 25. | 12 June, 2017

Getting this error more frequently. Whats causing this?? I have to reset machine every time costing man hours. After resetting its fine but does it at least once a day.

reply »

#77718

Camera not parked error on mpm ap 25. | 12 June, 2017

Don, either you have a faulty park sensor or much more likely the vision gantry Y axis is not reaching the sensor. Possible issues, one of the two VY drivers cards is failing; one of the VY forcer motors (air bearings) is failing; to much air leaking from the forcer air tubing; misalignment of the forcers to platen (long metal bars the forcers ride on). Possibly, but very unlikely, there could be issues with the CPU motion card, interface card or even I/O system.

reply »

Flux-Free Reflow Soldering

Jet Printing and Cleaning Challenges