Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Which kind of supplier should I choose for pcb fabrication?

Views: 7975

Hi All, We have a project and need produce 500pcs pcb boa... - Jun 20, 2017 by claire-08  

#77878

Which kind of supplier should I choose for pcb fabrication? | 20 June, 2017

Hi All,

We have a project and need produce 500pcs pcb board for smart phone. There are two kinds of supplier for pcb fabrication, one is professional prototype for small volum, another is factory for big amount. I don't know how to choose. Is there anyone give me suggestion, which supplier is suitable for me ?

Best Regards Claire

reply »

#78054

Which kind of supplier should I choose for pcb fabrication? | 2 July, 2017

Hi, if you need produce 500pcs only, I suggest you choose the professional prototype for small volume one. Such factory can meet your requirement and will always provide good service, if you choose the big factory, may be the qualitry of board is not much different, but they will not take you as a important customer, and you also can not ask for good service, because your order size is not big enough.

reply »

#78059

Which kind of supplier should I choose for pcb fabrication? | 4 July, 2017

Claire,

In my opinion the choise is obvious. You should select prototyping PCB house. If the PCB house filed is prototyping, quality will definetely be better comparing to huge PCB houses.

Regards

reply »

#78065

Which kind of supplier should I choose for pcb fabrication? | 5 July, 2017

Claire, my suggestion is different from BentePCB & Pavel Murtishev. Although 500pcs cannot be considered as a mass production order, it's too larger to be placed as a prototype order. And I think the PCB quality & performance is very important, you cannot risk to place it as a prototype order.

My advice is that you find a PCB Fab House emphasize in handling middle volume PCB fabrication. They will process your 500pcs order with full attention. Even better, they can provide competitive quality-service-price offer compared to PCB Prototype House & Large Factory.

reply »

#78066

Which kind of supplier should I choose for pcb fabrication? | 5 July, 2017

Hi Claire,

Is it a 4G smart phone? Generally, 4G pcb board is HDI pcb with laser drilling and small line width and

space, and not all PCB suppliers can manufacture because HDI PCB has special requirements for equiment,

and small factory can not afford them. The square is about 4 sq.m for 500pcs, and need a little longer

lead time than through-hole board with the same layer count. The prices of different suppliers may differ

a lot.

I'm a sales in pcb and assembly field for 5+ years experience. If I were you, I will ask price and

delivery time from a few suppliers first. smart phone needs reliable quality, I think making protypes to

check quality is necessary. Then to decide choosing which supplier.

Hope it is helpful for you.

Rgds,

Alan

reply »

#78278

Which kind of supplier should I choose for pcb fabrication? | 12 July, 2017

I think that both pcb prototype manufacturers or factories for big amount, will have their manufacturing capacity, the focus is still depends on your gerber file. You can consult and then place an order. I have used wellpcb, which is focus on rapid pcb prototype manufacturing for small volume. I was more anxious to my project, i need my pcbs urgently and i receive my pcbs in three days, of course there will be a certain fee for urgent. But I think they still pay more attention to my order, because in such an emergency situation.

reply »

#78537

Which kind of supplier should I choose for pcb fabrication? | 29 July, 2017

We now offer free expedite for PCB prototype. Min $5 for Standard 1-2 layers board with 24-48H lead time http://www.allpcb.com/T2 Min $34.78 for Standard 4 layers board with 48-72H lead time http://www.allpcb.com/T2 We think it should be very helpful for your projects. Also welcome to visit: http://www.allpcb.com/T2 to get a $5 cash credit, This can directly use for PCB orders. If you are interesting, welcome to contact me for detail

reply »

#78810

Which kind of supplier should I choose for pcb fabrication? | 1 September, 2017

Hi, i recommend jlcpcb.com. i made order from it few times. 10pcs first time, cost 10$,really high quality, arrived good time, after that, order few times too, and the price is so good,you could try small volum before make large order.

reply »

#78855

Which kind of supplier should I choose for pcb fabrication? | 11 September, 2017

Seeed Studio is the best I've seen on small runs: https://www.seeedstudio.com/fusion_pcb.html

reply »

#78859

Which kind of supplier should I choose for pcb fabrication? | 11 September, 2017

I think that the question is more of, who can cover your technology on the board.

reply »

#79353

Which kind of supplier should I choose for pcb fabrication? | 17 November, 2017

Dear Claire,

How is everything going? This is YourPCB Technology in Taiwan. We provide one total solution for PCB fabrication. We hope that our clients can get better and better with our service. If you have any questions, please don’t hesitate to contact us. We look forward to hearing from you.

Sincerely,

Yao YourPCB Technology Co., Ltd. Yuan Rong Technology Co., Ltd. Cell phone: 886-932-368758 Rep: 886-3-4637790 Tel: 886-3-4636511 ext. 11 Fax: 886-3-4512226 Email: yao@yrtech.com.tw Website: http://www.yrtech.com.tw/eng/

reply »

#79368

Which kind of supplier should I choose for pcb fabrication? | 22 November, 2017

Hello there, Do not know if you have already chosen the supplier to start your order. This is wellpcb, which have two modern PCB factories. WellPCB specializes in online prototyping and assembly. WELLPCB is capable of producing 100,000 square feet of 2-32 layer PCBs and delivering over 5000 varieties monthly. We can produce quick turns to meet 24-hour delivery for double-sided PCBs, 48-hour for 4 to 8 layers and 120-hour for 10 layers or higher PCBs. Link:http://www.wellpcb.com contact:sales@wellpcb.com

reply »

#79541

Which kind of supplier should I choose for pcb fabrication? | 3 January, 2018

> Hi All, > > We have a project and need produce > 500pcs pcb board for smart phone. There are two > kinds of supplier for pcb fabrication, one is > professional prototype for small volum, another > is factory for big amount. I don't know how to > choose. Is there anyone give me suggestion, which > supplier is suitable for me ? > > Best > Regards Claire

I think you can try ourpcb manufacture, they deliver fast and cheap, here is the price of their pcb prototype, link: https://www.ourpcb.com/pcb-prototyping

reply »

#79704

Which kind of supplier should I choose for pcb fabrication? | 2 February, 2018

Hi Clare, One of the best I ever tried is Smt Low Cost. Is also based in EU. http://www.smtlowcost.com For me faster and better than China.

Regards.

reply »

#79705

Which kind of supplier should I choose for pcb fabrication? | 2 February, 2018

Totally agree with you, Adam. I also try to avoid " always China" Check also Smt Low Cost. Is new is good is cheap! and they provide to my company a really good service. www.smtlowcost.com

best regards.

Paula

reply »

#80766

Which kind of supplier should I choose for pcb fabrication? | 26 July, 2018

How to select high quality PCB circuit board manufacturers? There are many kinds of PCB circuit boards, and many kinds of high-end technical support are needed in the process and production research and development. In order to know whether the products produced by the manufacturer meet our purchasing requirements, we can first ask the manufacturer to provide some PCB circuit board samples. We can judge the strength and expertise of the manufacturer by the quality of these samples. Other words: prototype. Most PCB fab offer prototype service. like ALLPCB,PCBWAY,PCBHOME,ELECCROW.ETC.

PCB circuit board can be used in all walks of life, a high-quality circuit board manufacturer, the production circuit board product should not be single, it should be able to provide different products for different industries in need. Shenzhen jingbang science and technology has the independent production research and development ability, has the specialized engineer and the advanced manufacture craft, can provide the customer the different profession PCB solution, the product may be used in the military industry research, the electric power electron, the industrial production, the communication, the medical treatment, the security guard, the automobile and so on profession, involves the domain widely.

Allpcb PCBWAY offer full service. LIKE HDI,HIGH-PCB.

Then compare the produce time. PCBWAY:normal board (1-2 layer)prototype 1-S days. ALLPCB: 1-2 DAYS prototype and small batch produce.PCBHOME,ELECCROW :2-3days prototype.

I hope this guide was of some use for you!

reply »

#81317

Which kind of supplier should I choose for pcb fabrication? | 29 October, 2018

This is Joe from Shenzhen Vip Circuit Co,. Ltd.-- a leading PCB and PCBA manufacturer in China. Why choose Vipcircuit ? 1. PCB fabrication with 100% ET and AOI testing,certified by ISO, UL; 2. Special material like Rogers,Arlon,Taconic,Aluminum base; 3. Special technology PCB such as HDI, heavy copper,golden finger,flex or rigid-flex and so on; 4. Multilayer from 1L to 30L 5. Minimum trace and space: 3/3 mil; 6. Fast lead time for 1L or 2L: 24 hours; 7. PCB reverse engineering service (provide PCB schematics,BOM and gerber file); 8. Component procurement and PCB assembly. Welcome that if you can send us any of your inquiries and we will try our best to give you a best price and fastest service. E-mail: joe@vipcircuit.com http://www.vipcircuit.com

Attachments:

reply »

#81487

Which kind of supplier should I choose for pcb fabrication? | 24 November, 2018

Choose a supplier who has a strong team of technical professionals and has gained expertise in providing a silk screening process to reduce PCB artwork cost used in PCB Fabrication.

reply »

#81488

Which kind of supplier should I choose for pcb fabrication? | 24 November, 2018

There are some specific guidelines to select he manufacturing partner please follow the same http://smtinsight.com/six-things-to-know-before-selecting-an-ems-provider/

reply »

3 day PCB Assembly

KIC SPS Smart SMT Reflow Oven Profiler