Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Adding conveyor to 4000c

Views: 1460


Adding conveyor to 4000c | 5 December, 2017

Hi all,

We traded our 4c work holder for a transport with another company. Eventing works, except that when I put a board in it does not index. All the other functionality seems ok. The rail width moves, I can eject the board, and it knows it needs to clear the transport if there is a board loaded on initialization. I made sure w1 is jumped. Any thoughts? I am at a loss. Thanks in advance.

reply »


Adding conveyor to 4000c | 7 December, 2017

Is that a 3 stage conveyor or a single stage? If it is a single stage, your sensor doesn't work, because your motor is already turning. If the input stage is separate you have two options - sensor or motor. Just check them both for proper functioning.

reply »

Facility Closure

conformal coating pcb - asymtek