Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Baking MSL components in vacuum.

Views: 1078

Hello, i would like to ask if there is any differencies whe... - Jan 03, 2018 by Vojtěch Grék  

Hi, "Baker with controlled humidity 5%" is actually dry c... - Jan 09, 2018 by Hypnotia  


Vojtěch Grék

#79539

Baking MSL components in vacuum. | 3 January, 2018

Hello, i would like to ask if there is any differencies when baking components in baker with control huminidity 5% or when baking components in vacuum?

is it ok ? or it should not be baked in vacuum?

And one more question: Is it possible to bake trays on each other? For example: Five trays on each other?

reply »


Hypnotia

#79585

Baking MSL components in vacuum. | 9 January, 2018

Hi,

"Baker with controlled humidity 5%" is actually dry cabinet. Using of dry cabinets i.e. ambient temperature baking is preferred.

Vacuum will always be better. If you are going to use vacuum chamber, that will be the best method in my opinion.

Regards

reply »

Facility Closure
SMT Reflow Ovens
Now Online
68
Visitors
5
Members

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Thermal Interface Material Dispensing
thru hole soldering and selective soldering needs
Automotive Precision Fluid Dispensing Machines

Reflow Oven