Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


SAMSUNG CP40C(V) DPRAM Initialize problem

Views: 1577

#79611

SAMSUNG CP40C(V) DPRAM Initialize problem | 12 January, 2018

Hello dear, we have own SAMSUNG CP40CV pick and place machine. Today I had to change a battery in PC mainboard. It didn't work immediately. I had to open BIOS and load DEFAULT SETTINGS. Now I can start a computer but after Windows is started it will show "DPRAM Initialize" and popup message "Please restart machine!". Maybe there is necessary to do some special settings in BIOS. I don't know. Any idea? Many thanks for reply.

Attachments:

reply »

#80245

SAMSUNG CP40C(V) DPRAM Initialize problem | 13 April, 2018

PROBLEM SOLVED

I bought a diagnostic PC card (ISA/PCI) for checking the PC of the machine... Firstly I tried ISA slot - nothing happend.. the diagnostic card didn't work... so I tried to put it into PCI slot but.... what happend ? The machine started correctly..... It looks like the ISA port was deeply sleeping after battery changing. The diagnostic PC card cost only 10usd on Aliexpress... perfect tool for geek.

reply »

#80748

SAMSUNG CP40C(V) DPRAM Initialize problem | 24 July, 2018

Were you able to fix the problem ?

Regards, David

reply »

Selective Conformal Coating System

Sell Your Used SMT & Test Equipment