Stencil and PCB Coplanarity measurement

Subscribe to Thread

Hi Experts, I am interested in having a tool or process to ... - Apr 06, 2018 by Diego

The easiest way to do without special tools is to use level... - Apr 09, 2018 by Evtimov

What kind of level have micrometer precition? ... - Apr 09, 2018 by Diego

Of course, the more accurate the better. However, it might b... - Apr 10, 2018 by Evtimov

What I mean is.... What Brand and Model should I buy to meas... - Apr 11, 2018 by Diego

Diego

#80177

Stencil and PCB Coplanarity measurement | 6 April, 2018

Hi Experts, I am interested in having a tool or process to measure coplanarity between the PCB pushed-up in the printing process and the Stencil. Therefore having a way to calibrate them.

reply »

Evtimov

#80187

Stencil and PCB Coplanarity measurement | 9 April, 2018

The easiest way to do without special tools is to use level. Check machine co-planarity on the conveyor rails in both directions(you can do that with rails down or rails up or both). Then check co-planarity on the stencil. If the level shows the same on both, you should be fine.

reply »

Diego

#80197

Stencil and PCB Coplanarity measurement | 9 April, 2018

What kind of level have micrometer precition?

reply »

Evtimov

#80213

Stencil and PCB Coplanarity measurement | 10 April, 2018

Of course, the more accurate the better. However, it might be a challenge to calibrate with really precise one - still better to take your time and do it right. Good luck!

reply »

Diego

#80228

Stencil and PCB Coplanarity measurement | 11 April, 2018

What I mean is.... What Brand and Model should I buy to measure coplanarity between this 2 surfaces that could measure micrometers of difference

I think that normal bubble levels are not precise enought for this use ^^

reply »