Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


DEK 265 GSX air conditioner refrigerant pressure

Views: 3100

#80320

DEK 265 GSX air conditioner refrigerant pressure | 27 April, 2018

hello everyone,

I have issue with one of my DEK air conditioners, it starts to freeze soon after we turn it on. most probable cause is low air flow or low refrigerant pressure. does anyone know what is operating refrigerant pressure range for DEK air conditioner from 1999 ?

thank you for your help

reply »

#80322

DEK 265 GSX air conditioner refrigerant pressure | 27 April, 2018

Typically freezing and air conditioners equals a low charge.

reply »

#82258

DEK 265 GSX air conditioner refrigerant pressure | 30 March, 2019

Are you still facing this issue? Well, I am so late to get to know this. I think you first check your evaporator coil if your air conditioner is still freezing up. It has been seen that a dirty airflow coil stops the proper flow of air through it. It may drop the temperature and as a result of which, your AC start freezing up. Apart from this, there may be lots of reason why your AC unit freezes when it is turned on. Warm air is needed for the coil to stay cold and keep the temperature above freezing. I think you should consult with the professional HVAC contractor to solve this issue. You can also check this site https://www.santabarbarahvaccontractor.com to hire qualified engineers that have a brief knowledge of the air conditioning system. I know how AC is important to us in the summer season. When the summer knocks on the door, then AC becomes the most wanted necessity.

reply »

#82264

DEK 265 GSX air conditioner refrigerant pressure | 30 March, 2019

This is not an HVAC unit. This is a small unit attached to a production machine to keep the solder paste from drying out prematurely or slumping. The volume of air being cooled and desicated would be less than 3 or 4 cubic meters.

reply »

Facility Closure

pcb assembly supplies