Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SONY SI-F209 Error at startup

Views: 1979

Hi We are using a Sony SI-F209,yesterday we encounter str... - May 10, 2018 by Ringel  

hi, what have you already done to resolve this? is this MC l... - May 11, 2018 by bukas  

The first time i resolved it i just did a normal maintenance... - May 11, 2018 by Ringel  

The first time i resolved it i just did a normal maintenance... - May 11, 2018 by Ringel  

and during that normal maintenance did you move motor cables... - May 11, 2018 by bukas  

No i didn't move any cable just cleaned the old grease and a... - May 11, 2018 by Ringel  

OK guys i finally traced the error it was the R-Axis motor r... - May 25, 2018 by Ringel  


Ringel

#80372

SONY SI-F209 Error at startup | 10 May, 2018

Hi

We are using a Sony SI-F209,yesterday we encounter strange error. The machine fails to start any servo motors and we get the message shown at the attachment. Hope someone can figure it out cause we're really stuck right now. We spoke with the company and at the moment they are looking at it also.

P.S. Use view image to see full picture

Attachments:

reply »


bukas

#80377

SONY SI-F209 Error at startup | 11 May, 2018

hi, what have you already done to resolve this? is this MC library a file you can locate? if yes, try replacing it with backup. corrupted databases and libraries can cause such failures.

reply »


Ringel

#80378

SONY SI-F209 Error at startup | 11 May, 2018

The first time i resolved it i just did a normal maintenance and i thought that the motors where overloaded from old grease. But now this is not the case cause this came just 2 weeks after the maintenance.

reply »


Ringel

#80379

SONY SI-F209 Error at startup | 11 May, 2018

The first time i resolved it i just did a normal maintenance and i thought that the motors where overloaded from old grease. But now this is not the case cause this came just 2 weeks after the maintenance.

reply »


bukas

#80380

SONY SI-F209 Error at startup | 11 May, 2018

and during that normal maintenance did you move motor cables and connectors? or motor controller board cables/connectors? you need to give us some more info on what you did there...

reply »


Ringel

#80381

SONY SI-F209 Error at startup | 11 May, 2018

No i didn't move any cable just cleaned the old grease and applied a new one, also checked the tension of the belts and cleaned the inside of the machine. In any case no cables where moved at the maintenance process. And the only info i have is the error picture i posted.

When this error happens the servos of the machine don't start and also no assembly program can be loaded.

reply »


Ringel

#80470

SONY SI-F209 Error at startup | 25 May, 2018

OK guys i finally traced the error it was the R-Axis motor rolling bearing. It broke so the motor could not start.

reply »

convection smt reflow ovens
IPC/WHMA-A-620 training Nasa Space Addendum
Now Online
52
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

pcb potting
Fixate labor costs with selective soldering solutions
Thermal Interface Material Dispensing

SMT spare parts - Qinyi Electronics