Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


GSM1 zero - timeout waiting for spindle up error

Views: 165

#81054

GSM1 zero - timeout waiting for spindle up error | 14 September, 2018

I have a GSM1 that when try to zero it, it stops with the "Timeout waiting for spindle up" message. To get thsi up and running, I have set all my machine settings to default and had to reselect the head from a C4 1 head to the flex head. I initially had issues with the y axis, but upon swapping the Axis 1 and 2 cards that came up. I also swap the Axis 3 and 4 cards as I was seeing an axis 3 and 4 error on the back panel. I believe these are probably for an additional head or the PTIF. I have power to the head and the sensors are working when the spindles are moved manually. The only other issue I have is I am currently running with 110 psi house air with no regulator. That will be fixed next week. Any suggestions on where to start? I have no manuals or online documentation.

reply »

Fast PCB Assembly

Capillary Underfill process