MYDATA MY15E F-MOT-SETDYN Z/3: Upper end point outside limit

Subscribe to Thread

I am looking for some help for where to look to fix this MY1... - Oct 11, 2018 by MK

Sounds like one of the Z stops is not functioning or needs t... - Oct 12, 2018 by tech1

hello try to calibrate the Z axis, check the cable must b... - Oct 30, 2018 by Armando_Gomez

#81196

MYDATA MY15E F-MOT-SETDYN Z/3: Upper end point outside limit | 11 October, 2018

I am looking for some help for where to look to fix this MY15E problem. We started the machine after the weekend and this error code comes. F-MOT-MSETDYN z/3: Upper end point outside limit. Any suggestions? Thanks

reply »

tech1

#81215

MYDATA MY15E F-MOT-SETDYN Z/3: Upper end point outside limit | 12 October, 2018

Sounds like one of the Z stops is not functioning or needs to be adjusted.

reply »

Armando_Gomez

#81335

MYDATA MY15E F-MOT-SETDYN Z/3: Upper end point outside limit | 30 October, 2018

hello

try to calibrate the Z axis, check the cable must be damage, check if the transducer is loose, just some options from the top of my head, have you try getting into service and make it work there? if not try that too.

reply »