Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


MYDATA F-MOT-MOVE X/245 Motor drive inhibited

Views: 1578


MK

#81197

MYDATA F-MOT-MOVE X/245 Motor drive inhibited | 11 October, 2018

hello, Does anyone know about the error F-MOT-MOVE X/245 Motor drive inhibited. The machine hardware initiation ready and approximately an hour later, you will see an error. Thanks

reply »

#81216

MYDATA F-MOT-MOVE X/245 Motor drive inhibited | 12 October, 2018

There are 2-X motors and numerous items that could be causing this: 1 of the X motors, 1 of the X transducers, 1 of the couplings connecting the motor and transducer, X Kevlar Belt.

If you know how to go into the service portion of the software you can read the transducer position on the X belt and X wagon motors and see if they read and are somewhat consistent.

reply »

#81267

MYDATA F-MOT-MOVE X/245 Motor drive inhibited | 18 October, 2018

Interesting. What changes in 1 hour? Is there any connection between the error and feeder/magazine change, load reload? Is there any other factor observed in the hour of work that is abnormal?

reply »

#81268

MYDATA F-MOT-MOVE X/245 Motor drive inhibited | 19 October, 2018

IIRC There is a friction test? If I remember correctly, what is the result?

reply »

#81282

MYDATA F-MOT-MOVE X/245 Motor drive inhibited | 23 October, 2018

This wound up being a power supply cutting out after a period of operation.

reply »


MK

#81300

MYDATA F-MOT-MOVE X/245 Motor drive inhibited | 25 October, 2018

thank you for your advice, the problem was in the elmo source 350V, there was a problem of dropping voltage when the engine accelerated.

reply »

used pcb assembly equipment - lel semi

SMT Custom Nozzles