distance from the edge Non-plated mounting hole and with copper pads ?

Subscribe to Thread

Hi everybody, I have a question about the minimum di... - Oct 26, 2018 by farouk225

I'm not aware of a standard requirement. One screw hole diam... - Oct 26, 2018 by davef

Is there any chance that something like a riv-nut might be u... - Oct 26, 2018 by Steve Thomas

farouk225

#81311

distance from the edge Non-plated mounting hole and with copper pads ? | 26 October, 2018

Hi everybody,

I have a question about the minimum distance to leave beteween a non non-plated mounting hole with copper pads and the edge of the PCB. Is there any formula or rule to apply ? For example for a hole of diamater equals to 5.6mm which valuable distance I have to leave from the hole to the edge of my PCB.

Thanks for your help.

reply »

davef

#81313

distance from the edge Non-plated mounting hole and with copper pads ? | 26 October, 2018

I'm not aware of a standard requirement. One screw hole diameter seems to used commonly.

reply »

Steve Thomas

#81314

distance from the edge Non-plated mounting hole and with copper pads ? | 26 October, 2018

Is there any chance that something like a riv-nut might be used for mounting purposes or is it just a screw hole?

reply »