Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


EKRA E-1 "Referencing in progress" too long.

Views: 882


Pam

#81416

EKRA E-1 "Referencing in progress" too long. | 14 November, 2018

We have an EKRA E-1 screen printer that operate with no problems for several months, then all of a sudden it will spend hours or days on the "referencing in progress" message. It's currently been stuck on this message for about 30 hours. Any ideas what could be wrong?

reply »

#81425

EKRA E-1 "Referencing in progress" too long. | 15 November, 2018

When our older Ekra machines wont reference.....we will either try to e-stop it and then turn the control back on and reference it again....or turn the machine off and back on.

I would check all the sensors on the machine and also try to reposition the print head and/or camera to see if that helps.

good luck.

reply »


Pam

#81426

EKRA E-1 "Referencing in progress" too long. | 15 November, 2018

Thanks for your suggestion, bobpan.

We did try that, and also try to trip the cover and flap interlocks, and various combinations/sequences of both. Doesn't want to work.

reply »

Manufacturing Software

x-ray inspection system