Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Siemens Siplace F5 conveyor system works sporadically.

Views: 3395

#81584

Siemens Siplace F5 conveyor system works sporadically. | 8 December, 2018

Hi, Was wondering if anybody has any experience with F5 with the conveyors will work sporadically. If I put a board on the input sensor in which it sees it will work, the next 5 minutes it won't work. Could this relate to the K2 relay, if so does anybody know what wires that run the conveyors. I had experience with the F4 and S20s but not with F5's. Also board width in and out does the same thing sometimes it works and sometimes it doesn't. If anybody could help I would appreciate it, as we just bought this machine and trying to put in line as soon as possible. Thanks. Ryan

reply »

#81595

Siemens Siplace F5 conveyor system works sporadically. | 12 December, 2018

Yes, I think the same. The K2 relay will be the problem. As I remember there is one contactor which is identically the same but not used. Put the conveyor to the other one.

reply »

#81607

Siemens Siplace F5 conveyor system works sporadically. | 15 December, 2018

Kristof_k I put it to the other open spot 33,34 on the K2 relay,and it now works consistently Thanks for your help, I appreciate it! - Ryan

reply »

SMT Custom Nozzles

reflow oven profiler