Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


PCBA Depanelers

Views: 2606

#81867

PCBA Depanelers | 1 February, 2019

What do people recommend for PCBA Depanelers/routers. Need to have the following: Inline China support (Shanghai area), Chinese language capable, Grippers/vacuum nozzles to pick individual boards from panel to designated area.

Thanks

reply »

#81887

PCBA Depanelers | 4 February, 2019

Asys again, same as their laser markers from your other question. I've had good service from their bottom routers. They are called the Divisio range now.

reply »

#81888

PCBA Depanelers | 4 February, 2019

Thank you.

reply »

#81889

PCBA Depanelers | 4 February, 2019

No worries.

From memory you could get 2 types of head - 1 where you had grippers and the other where the head held the whole panel. We had interchangeable grippers. Also had some Cencorp 1000 & 1300BRs which were ok, but not sure on Global support network.

reply »

#81892

PCBA Depanelers | 4 February, 2019

Thanks for the feedback. I hear Cencorp has no support in China or Chinese language compatibility on the machine. Otherwise I would look at them.

reply »

#81895

PCBA Depanelers | 5 February, 2019

As an alternative Aurotek looked quite good, and I've seen a few in Europe.

https://www.aurotek.com/en/

Based in Taipei, so not far from the Chinese market.

reply »

#81896

PCBA Depanelers | 5 February, 2019

Thanks.

reply »

#83493

PCBA Depanelers | 1 October, 2019

Does anybody know why PCB routers are so (relatively) expensive? I have got quotes on 5 or 6 different standalone routers with the cheapest being a little less than $70K and the most expensive being $110K. This is as much or more than we paid for a new pick-and-place machine!

reply »

#83495

PCBA Depanelers | 1 October, 2019

Probably because boards get designed with a required route to be 5 mils from some copper.

reply »

Reflow Oven

Led testing color sensors