Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Assembleon Topaz L050:POWER DETECT ER LT2(50)

Views: 492

#81893

Assembleon Topaz L050:POWER DETECT ER LT2(50) | 4 February, 2019

When I power up the machine and it finishes booting into VIOS, I normally hit the ready button to power up the drives so I can perform the origin search. Instead of "latching on" the contactors pull in, and then quickly release. If you hold down the ready button it will cycle and try again continuously. The machine displays this error at the bottom of the screen in red, the manual doesn't get very descriptive and only says that a servo power rail is faulty or not present. L050:POWER DETECT ER then after that it shows LT2(50) In the past I could just let the machine try for 10 or 20 seconds and then it would work fine but whatever is failing seems to have quit entirely now. I have a feeling it has something to do with my LCS, since the tray changer vertical axis clutch cycles with the contactors in the machine. Any insight is greatly appreciated

reply »

Jade Series Selective Soldering Machines

Fluid Dispensing Aerospace