Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


DEK 265 Horizon

Views: 1524

#82049

DEK 265 Horizon | 21 February, 2019

I am trying to do a Pass Through and the DEK wont send the board to the Conveyor and it says its waiting for downline transfer even when the SMEMAs are tripped. and on the Multi - Interface Unit, the light next to downline ready is not on. Any help?

https://gyazo.com/26fd5cf2a305343459d5ce2f23f9fc3e

reply »

#82050

DEK 265 Horizon | 21 February, 2019

I don't know...but at DEK horizont i2 , i3 and ASM have option in machine settings "print/no print....if you check "no print" machine work in passthrough mode...

reply »

#82051

DEK 265 Horizon | 21 February, 2019

Are you saying that it works in print mode and not in pass thru mode? Or that is won't pass boards downline regardless?

reply »

#82052

DEK 265 Horizon | 21 February, 2019

It won’t pass down regardless

reply »

#82053

DEK 265 Horizon | 21 February, 2019

Is Downline FMI set to MIU? Is MIU configured (SW3) for correct interface protocol? Is downline cable pinned out correctly?

reply »

Global manufacturing solutions provider

SMT feeders