DEK 265 pneumatic power down error

Subscribe to Thread

We had an issue where a vision cable got cut and a few wires... - Mar 28, 2019 by Jeff

Pneumatic power down error does go back to MMX12. MM's info ... - Mar 28, 2019 by DEKHEAD

Good Day Sir. Where is the MMX? ... - Jul 30, 2020 by Mike

MM (MultiMove) cards are in the M19, Motor Control, crate (l... - Jul 30, 2020 by DEKHEAD

Jeff

#82232

DEK 265 pneumatic power down error | 28 March, 2019

We had an issue where a vision cable got cut and a few wires were exposed and possibly shorted. We fixed the cable and since then have had numerous errors with the last one being pneumatic power down. We have air to the machine and have checked the pneumatic switch and traced it back to the MultiMove. We are wondering if there is communication issue between these cards and the computer?

reply »

DEKHEAD

#82233

DEK 265 pneumatic power down error | 28 March, 2019

Pneumatic power down error does go back to MMX12. MM's info is communicated to NM (in PC enclosure) via 100 way cable. Depending on software version, the "Pneumatic Power Down" error may be the default (initial) error generated with bad connection / disconnection of that cable DEKHEAD

reply »

Mike

#85350

DEK 265 pneumatic power down error | 30 July, 2020

Good Day Sir. Where is the MMX?

reply »

DEKHEAD

#85352

DEK 265 pneumatic power down error | 30 July, 2020

MM (MultiMove) cards are in the M19, Motor Control, crate (located front of machine, right side). MM's are the larger cards located on the far right side; X11, X12 and X13 slots (X11 slot is only used in Infinity, empty slot on Horizon / ELA).

reply »