Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Machine Leveling

Views: 657

#82528

Machine Leveling | 10 May, 2019

What issues occur when Pick and Place machine is not properly leveled?

reply »

#82530

Machine Leveling | 10 May, 2019

If you could provide machine type and also clarify what you mean when you say "improperly leveled" that might be helpful.

Do you mean the right process wasn't followed during leveling, or do you mean that the machine isn't level after the process was completed?

reply »

#82531

Machine Leveling | 10 May, 2019

First of all, you would have boards frequently being stuck in between inline machines. In order for the best inline setup, all the machines should be properly leveled to have smooth transport from start to finish.

reply »

#82532

Machine Leveling | 10 May, 2019

Sorry for not being specific. Here's what i mean, If fuji AIMEX is not leveled up after the setup, what problems will occur in pick and place operation or in whole SMT line?

reply »

#82533

Machine Leveling | 10 May, 2019

Are X & Y axis motors affected because they may "climb" or "Moves down" as machine is not leveled up?

reply »

#82546

Machine Leveling | 13 May, 2019

you can choose buy our reflow oven,sir.

if our product gets any worries,welcome you contact our engineer.

reply »

Electronics Experts Needed - Contract Jobs - We have Electronics Auditor positions available now!

SMT Machines

PCB equipment