DEK265gsx system button problem

Subscribe to Thread

Hello, Dek printer is starting successfully until "pre... - Jul 17, 2019 by weglimir

Lots of things it could be (basics first): E-Stop pressed. C... - Jul 18, 2019 by DEKHEAD

I have a 265 horizon. I've noticed that if we wait more than... - Jul 20, 2019 by kyleh04

It came out that 24V relay switch in the power supply part w... - Jul 24, 2019 by weglimir

weglimir

#83012

DEK265gsx system button problem | 17 July, 2019

Hello,

Dek printer is starting successfully until "press System switch to initialize printer" but nothing happens when I press the button. What could be the reason?

I've tried another pait of monitors with different system button, and it doesn't change anything, so it is definitelly not the button problem.

Thank You.

reply »

DEKHEAD

#83019

DEK265gsx system button problem | 18 July, 2019

Lots of things it could be (basics first): E-Stop pressed. Connections within E-stop circuit (mostly Y4). Connection of SYSTEM switch back to Y4. E-stop relay.

Do double pushbuttons toggle partial SYSTEM?

reply »

kyleh04

#83042

DEK265gsx system button problem | 20 July, 2019

I have a 265 horizon. I've noticed that if we wait more than a minute or so after that screen appears, it does the same thing you describe. It's like it goes to sleep and doesn't register the button. So maybe try watching the screen, and right as you're prompted, press the button.

reply »

weglimir

#83063

DEK265gsx system button problem | 24 July, 2019

It came out that 24V relay switch in the power supply part was simply broken. When we fixed that - stop button was pressed, but we came to this conclusion eventually!

reply »