Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


mpm up2000 z axis hardware limit

Views: 1585

#83514

mpm up2000 z axis hardware limit | 3 October, 2019

Got a used mpm up2000. It gives z axis hardware limit warning when trying to teach vision. The board raises to camera then drops back down. However when loading a board for tooling, the board stays raised up. The z table can be manually raised up n down but when raised up to high it crashes back down. I dont have a manual and unable to access calibration. Any suggestions would be apppreciated as this is a new machine to me.

reply »

#83521

mpm up2000 z axis hardware limit | 4 October, 2019

I had as I placed the supports at the back - when lifting Z touched the rear rail - check.

reply »

#83522

mpm up2000 z axis hardware limit | 4 October, 2019

that doesn't seem to be the issue here

reply »

Reflow Oven

Led testing color sensors