Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Dek265 GSX Vision hardware error

Views: 3051

#83801

Dek265 GSX Vision hardware error | 23 November, 2019

Hello Everybody,

I have a problem with a DEK 265GSX, I get this error message:

Vision hardware error Controlled lighting not responding FATAL ERROR - REINITIALISE MACHINE

I have found that this might be due to a broken wire and I have checked all the wires and all wires are all right.

I have no idea how to fix this issue.

Attachments:

reply »

#83804

Dek265 GSX Vision hardware error | 24 November, 2019

Is camera powering up and self initialising? When power is applied to machine, camera lighting (Green or Silver) should power on, strobe with decreasing intensity and then stop. If lighting does not come on, looking at either no power applied (broken wire / PSU issue) or bad camera unit. If camera lighting doesn't stop strobing (decreasing intensity, pause, restart with high intensity, continued repeat) then it is an issue of communication (broken wire?) to Cognex or Cognex board itself. Far from absolute but should give you direction. Please feel free to contact me directly if you need wiring details. dekhead@att.net">dekhead@att.net

reply »

#83998

Dek265 GSX Vision hardware error | 20 December, 2019

Thanks for your reply We checked all the hardware found ok voltages are as per specifications Suspecting software issue but don't have software for installation Please confirm if you have this software version 04.03 so that we can have last try

reply »

Dual Lane Reflow Oven

FPC* - Fluid Pressure Control - Dispensing Pump