Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Mydata MY9 - US to UK conversion

Views: 853

#83858

Mydata MY9 - US to UK conversion | 3 December, 2019

We have purchased a Mydata MY9 from the US to use here in the UK. Does any know the how to convert the power configuration plugs? I have a L-029-0296 fitted but believe I need a L-029-0295 for the UK, it appears to be just a set of links but I do know the correct configuration for the UK. Also the EPT has similar linking plugs for 210V and I need to know which links are required for 230V. Can anyone advise please

reply »

#83901

Mydata MY9 - US to UK conversion | 6 December, 2019

If all else fails ... Mycronic Ltd., Unit 2, Concept Park, Innovation Close, Poole, Dorset, BH12 4QT, Tel: +44 1202 723 585 Fax: +44 1202 723 269

reply »

#83902

Mydata MY9 - US to UK conversion | 6 December, 2019

Thanks Dave, I have already called and was told to fill in an online enquiry to the technical department and I am yet to get a reply :(

reply »

#85896

Mydata MY9 - US to UK conversion | 11 November, 2020

An update. I managed to resolve the issue by wiring my own :) got a friend with a UK spec MY12 to take pics of the internal connections of theirs and then hard wired ours to match - worked perfectly. message me if you have a similar problem and I can send the drawings to enable you to do the same.

reply »

Voidless Reflow Soldering

Flexible pick & Place