Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Speedline AP/B printer metric option ?

Views: 679

#83950

Speedline AP/B printer metric option ? | 13 December, 2019

We've got an MPM Speedline AP/B that's in Imperial ( inch ) units - everything else here is Metric. Can this printer be configured to Metric units ?

Software AP/UP2000 sw ver 7.0c currently installed if that makes any difference

Cheers

reply »

#83954

Speedline AP/B printer metric option ? | 13 December, 2019

On our MPM UP3000's there is a configuration option in the maintenance menu. It has a button that changes from imperial to Metric.

reply »

#83970

Speedline AP/B printer metric option ? | 16 December, 2019

Not on mine Sadly. When you go to page 2 of the menu the units are displayed for reference only in a grey box on screen. Can't find any settings that will actually change yet

reply »

#83972

Speedline AP/B printer metric option ? | 17 December, 2019

You may have to do it through DOS or Windows pending the O/S Ed

reply »

#84163

Speedline AP/B printer metric option ? | 10 January, 2020

SOLVED !!

Booting up into DOS there's a file called optedt.exe in the AP folder. This is the option editor. It's password protected when you run it, but a quick look inside the code solved that one. QMPM gets you in if you need it

reply »

TWEEZER-VAC ELITE Vacuum SMD Tweezer Kit

MPM SMT screen printer parts