Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Question about Juki file packages

Views: 410

#84266

Question about Juki file packages | 23 January, 2020

I am trying to write a program to pull the feeder location from juki smt files and I am having trouble locating which file this information is located in. Basically what I am trying to accomplish with this program is to automate the set up process where you scan the part number, it comes back and tells you the feeder size and location. If anyone could give me a little guidance on where to find this information I would be extremely grateful. Thanks in advance!

reply »

#84343

Question about Juki file packages | 31 January, 2020

Have you tried PCBSynergy

http://members.iinet.net.au/~sarason/ Which specific Juki are you talking about? I have started adding this functionality for some of the Juki machines. Flexpog will give you this under DOS or a series of Juki programs like HLC , Flexline etc.

sarason

reply »

#84364

Question about Juki file packages | 4 February, 2020

It's not any one specific machine. We use the Juki IS files. In one of the files is the feeder location and I am not able to locate where (was hoping someone had gone through something like this before).

reply »

Capillary Underfill process

best reflow oven