Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Pinout for Quad CP30/CP40 Feeder connector

Views: 1550

#85176

Pinout for Quad CP30/CP40 Feeder connector | 8 July, 2020

Hello,

Trying to re-purpose a QUAD feeder for delivering small parts to a scada robot. Wondering if someone could help me out with a pinout for the connector. it's 8 pins Feeder is p/n 12/10-23959B SSA

Was able to get the board to power up and flash LEDs with 5V across two of the pins but I know the motor is 12V and I don't want to spoke this by poking around with 12V. Circuit is tough to trace, number of small traces and ICs.

PCB board labeled Samsung Aerospace with board number 60-23183 REv B

Any help appreciated thanks!!

reply »

#85178

Pinout for Quad CP30/CP40 Feeder connector | 9 July, 2020

12vdc on top pin 5vdc on bottom pin ground on second pin up from bottom.

the rest are only needed for IQ function on Quad assembler.

Bob

reply »

#85181

Pinout for Quad CP30/CP40 Feeder connector | 9 July, 2020

Bob you like beer? I'll send you a beer..

what's the IQ function, just feedback from the sensors/switches on the feeder?

reply »

#85182

Pinout for Quad CP30/CP40 Feeder connector | 9 July, 2020

I love beer...haha

IQ is communication between the feeder and machine to let the software know that the machine is picking the correct part.

If you need further help....you can email me at

www.precision-repairs.com

reply »

best reflow oven

TWEEZER-VAC ELITE Vacuum SMD Tweezer Kit