Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


bought Quad QSA30, need manual

Views: 2403

#85216

bought Quad QSA30, need manual | 15 July, 2020

I just won the bidding for a Quad QSA 30A P&P machine. Does anyone know where I can download the operator's manual, so I can start getting familiar with it?

Thanks,

Jon

reply »

#85261

bought Quad QSA30, need manual | 21 July, 2020

You may contact PPM in Fremont, NH. They sell and service Quad equipment.

reply »

#85264

bought Quad QSA30, need manual | 21 July, 2020

Yes, but they really only seem to be interested in dealing in PPM-refurbished Quad IV C machines. They will sell parts but don't seem to be very interested in supporting other models under the Quad label. (The QSA-30 was made by Samsung, but uses Quad feeders, and was sold in the US by Quad.) I don't think they can supply a manual, either electronic or paper. But, when the machine comes in, I'll bug them again.

Jon

reply »

#85422

bought Quad QSA30, need manual | 8 August, 2020

Well, the machine is here, it has some probems that I need to diagnose, and now I ***REALLY*** need the manuals (both maintenance and operations).

Two problems. One is that it will only come "ready" (servos powered on) ONE TIME per day! I'm totally at a loss how it even knows that.

And, it has a bad rotation (theta) motor on one head.

Thanks for any help anyone can give to get me the manuals.

Jon

reply »

#85464

bought Quad QSA30, need manual | 16 August, 2020

Well, I have now traced the ready button all the way into the DPRAM board, and all looks good going into a big flat pack chip, valid TTL logic levels when I press the button. But, the machine will not go ready. I have no errors in the system error message log, and press stop, stop and reset first, but it won't go ready.

I have checked the front button inputs in the I/O display page, and reset, stop and start display a red dot when you push the button. But, ready does NOT display a red dot when you press the button. I'm just out of ideas on what to check.

Thanks for any advice,

Jon

reply »

#85521

bought Quad QSA30, need manual | 26 August, 2020

Jon,

I have some Quad manuals as PDFs if you are interested. Contact me at the address on my webpage.

http://members.iinet.net.au/~sarason/ sarason

reply »

#85525

bought Quad QSA30, need manual | 26 August, 2020

Thanks,

I have ordered a replacement IO_DPRAM board from Korea, we will see if it fixes the problem. 2 weeks ago, right after I got the machine, it would go ready. After a couple days, it would no longer respond to the ready button. All attempts to troubleshoot the problem were not successful.

Jon

reply »

pcb components vacuum pick up

TWEEZER-VAC ELITE Vacuum SMD Tweezer Kit