Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Siemens S25 X-axis counting error

Views: 139

#85703

Siemens S25 X-axis counting error | 30 September, 2020

Hi all, was wondering if you have any ideas on how to correct the problem we are encountering with our S25 machine. The machine is giving an X-axis counting error at gantry 1. I replaced the x-axis linear reader and the linear scale as well, but still getting the same problem. The machine cannot find the correct position of the PCB fiducials because the x axis is always off on the x position. Thanks for your help.

reply »

#85704

Siemens S25 X-axis counting error | 30 September, 2020

Motor and motor driver are involved in the equation as well.

reply »

Reflow Oven

Voidless Reflow Soldering