Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Searching for a tape to seal the end of smd role after using

Views: 2509

#86021

Searching for a tape to seal the end of smd role after using | 19 December, 2020

Hi there.

I'm searching for a good adhesive tape to fix the used smd tape on its reel after mounting. So that the reel will not spin off. It should be have a great glue, so that there is no glue residue after next opening the reel.

Did anybode have a glue where to buy that? The smd manufacturer have these if you order full reels.

But i dont know where to buy...

Thank you in advance, Bjoern

reply »

#86022

Searching for a tape to seal the end of smd role after using | 21 December, 2020

Specific to this very purpose https://www.somersetsolders.com/smt-reel-sealers/p319?gclid=CjwKCAiArIH_BRB2EiwALfbH1AeOU9NaGStQBhvTITVHLZW0UtXMDFfbdo4YB4vtIyP9DxTGYWGAGhoCXLIQAvD_BwE

Nothing Steier is cheap, while its easy enough to find cheap alternatives for cover-tape extenders and splicing consumables, I haven't found anyone else making these, do let me know if you do.

Oh here's another https://www.allsmt.com/SMD-Tape-Reel-Sealer-Strips-with-2-non-adhesive-handles-ESD-type

reply »

#86023

Searching for a tape to seal the end of smd role after using | 21 December, 2020

Hi there.

Oh, great. The Allsmt stuff looks be perfect. I have to contact them now.

Thank you and merry christmas days!

reply »

#86030

Searching for a tape to seal the end of smd role after using | 22 December, 2020

SMT splice tape is what you are looking for.

reply »

#86031

Searching for a tape to seal the end of smd role after using | 22 December, 2020

I have been using 3M (Scotch) 233+ (6mm or 3mm width)

reply »

#86032

Searching for a tape to seal the end of smd role after using | 22 December, 2020

Interesting, too. I will test it if i dont get the other one. Thank you.

reply »

#86033

Searching for a tape to seal the end of smd role after using | 22 December, 2020

I dont think so. SMT splice tape is what i'm using to fit separate smd snippets together... Isnt it?

reply »

#86044

Searching for a tape to seal the end of smd role after using | 23 December, 2020

Yeah, if the convenient non sticky tab for unpeeling is not important to you, narrow tape is another option. "Grid Tape" used for drawing lines on whiteboards is not too sticky and only 4mm wide. Most of the time the lazy option of pulling it really tight and wrapping it down the side works too, if you have plenty of excess cover tape to make that work..

reply »

Manufacturing Software

24h pcb prototype and assembly