Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Old (ancient) MPM Accuflex screen printer camera light not working

Views: 1496

#86081

Old (ancient) MPM Accuflex screen printer camera light not working | 5 January, 2021

We have an old MPM accuflex and both camera lights stopped working this morning during production. We tried the bulbs but the new ones did not work either. Any ideas on this? I don't think we have a manual but will keep looking in the dungeon. Pleas help save 2021.

Rob

reply »

#86086

Old (ancient) MPM Accuflex screen printer camera light not working | 6 January, 2021

Measure if you have power where the light should go. Don't remember but it is probably 5V bulb/12V buld(it should say on it). if you have power, measure the bulb. I am not sure how new you new bulbs are.

reply »

#86119

Old (ancient) MPM Accuflex screen printer camera light not working | 11 January, 2021

Problem resolved- The machine camera had crashed when the operator put the PCB in upside down (this was kept secret until intense water boarding). The crash seem to take out a chip on the vision processing PCB. It was visually damaged and looked like it burnt up and cracked. We swapped the whole thing with an old parts printer and the machine is working.

Attachments:

reply »

Used SMT Equipment

On-board Dispensing of Dots & Lines