Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Components placement with different package

Views: 3298

#86847

Components placement with different package | 10 July, 2021

Hi all, As per PCB design have to mount SOT 6PIN, BUT Customer requested to place the SC-70 6PIN component. I know that it's very challenging for this activity. Customer is not ready to change the PCB design. So we have to mount SC-70 6PIN Component only. So please let me know any idea/process to solve this issue.

reply »

#86851

Components placement with different package | 13 July, 2021

You may have to use an adaptor board. A small board with one footprint on one side and the other on the other side. Do not assume that the pin outs of the two parts are the same. I have seen smaller parts with a different pin out than the bigger part it replaced.

reply »

#86859

Components placement with different package | 13 July, 2021

Just give them triple the price and they will love to make re-design. If you do what was suggested with the additional PCB, price might be close enough to triple.

reply »

Conductive Adhesive & Non-Conductive Adhesive Dispensing

SMT spare parts - Qinyi Electronics