Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Rotten smell from Electrovert Aquastrom 100

Views: 2215


Hau

#87895

Rotten smell from Electrovert Aquastrom 100 | 28 April, 2022

Hello Forum,

My washing machine have this rotten smell that I'm not sure where it comes from. I cleaned all the filters, changed new water, pretty much cleaned the whole machine but the smell still there. If anyone had this problem please advice. Thank you in advance.

reply »

#87898

Rotten smell from Electrovert Aquastrom 100 | 28 April, 2022

we once had a batch of IPA that had rotten smell. changed supplier and problem was solved.

reply »

#88160

Rotten smell from Electrovert Aquastrom 100 | 2 July, 2022

What kind of cleaner did you use ? Alcohol/ IPA probably does not work.

reply »

#88224

Rotten smell from Electrovert Aquastrom 100 | 26 July, 2022

It could be from your Deionized Mixed Beds. Resin on the mixed beds can have that smell if its bad or not flushed prior to use. Its a fishy/rotten eggs odor

It would still happen if you dumped the water but didn't swap out the tanks and would smell once the final rinse turned on.

reply »


Hau

#88225

Rotten smell from Electrovert Aquastrom 100 | 26 July, 2022

Thank you for your input Austin. That is exactly what happened. When I replaced the mixed bed, the smell stop.

reply »

convection smt reflow ovens

ICT Total SMT line Provider