Juki 2060 internal conveyor stopped working

Subscribe to Thread

The internal conveyor stopped working...won't take board in.... - Nov 21, 2022 by CrystalW

You should be able to check the sensor, most had have the re... - Nov 23, 2022 by leeg

Is there an IO screen so you can see what sensors are trippe... - Nov 23, 2022 by ProcEng1

The bottom piece of the sensor broke, and it threw it off, f... - Nov 24, 2022 by CrystalW

CrystalW

#88649

Juki 2060 internal conveyor stopped working | 21 November, 2022

The internal conveyor stopped working...won't take board in. Says there is a board inside machine...is it a sensor problem? Any suggestions? Nothing led up to this. Just started machine up after weekend, and it will not take the board in.

reply »

leeg

#88656

Juki 2060 internal conveyor stopped working | 23 November, 2022

You should be able to check the sensor, most had have the red light to indicate that a PCB is being detected. Depending on the version of software it should tell you within the manual control option too

reply »

ProcEng1

#88657

Juki 2060 internal conveyor stopped working | 23 November, 2022

Is there an IO screen so you can see what sensors are tripped?

reply »

CrystalW

#88659

Juki 2060 internal conveyor stopped working | 24 November, 2022

The bottom piece of the sensor broke, and it threw it off, fixed now. Wasn't sure, it must have come loose enough to throw it off, but not enough to trigger an error that it wasn't working...because it was still in the casing

reply »

SMTnet
»
Electronics Forum
»
Juki 2060 internal conveyor stopped working

The 2024 IPC Certifications Schedule is Here. Train In-Person, Online or On-Site. EPTAC is the Leader in Electronics Manufacturing Training with 24 Locations across North America.

Best Reflow Oven

"IPC training online, at your facility, or at one of our worldwide training centers including our brand-new training center in the Twin-Cities area of Minnesota. Blackfox Training."